As long as the factory crossbars on your RX300 are less than 3 inches wide, the Thule SnowPack Ski and Snow Board Carrier # TH7326 will work great for you.
I will provide a link to our product description video for the SnowPack, as well as a link to a video review. view full answer...
On the Derale Remote Dual Oil Filter Mount Kit, # D15707, it allows you to put your filter in a convenient location for easier oil changes. It is a dual oil filter, so it will give you additional filtration and increased oil capacity, it does not allow you to bypass the oil filter.
I would also recommend the Derale High-Temperature Replacement Hose for Engine Applications - 25' Long, # D15799,and the Derale Stainless Steel Hose Clamps (4 Piece), # D13008. view full answer...
I have a solution for you but no the Hidden Hitch you referenced does not fit your 2000 Lexus RX 300. The Draw-Tite Max-E-Loader Trailer Hitch Receiver item # 41541 does fit your RX 300. This custom fit hitch will bolt directly to your 2000 RX-300 with included hardware. It does not require any drilling or welding. I have attached an installation video. view full answer...
The Thule Passage Trunk Mounted 2 Bike Rack, part # TH910XT is indeed a fit for the 2001 Lexus RX300, but the 3 bike model, # TH911XT, or any 3 bike rack is not compatible, as the hatch on the RX300 does not have sufficient strength to support an additional bike.
If you are planning on using the rack frequently, do yourself a favor and check out the Thule OutWay, part # TH45JV. Rather than the 6 strap and buckle attachment system typically found on trunk mounted bike racks, the OutWay... view full answer...
The etrailer.com Hitch Mounted Cargo Carrier, item # e98874, will fit on your Lexus RX300 when folded if the measurement from the center of the hitch pin hole out to the farthest part of the rear of the vehicle is 9-1/2 inches or less and you have a Class III or larger 2 inch receiver hitch installed on the back of your vehicle.
Clearance for opening the tailgate when the carrier is loaded is unlikely, unless the cargo on the carrier is very low profile. There is no way to determine if... view full answer...
PWM stands for Pulse Width Modulation, which is a particular wiring system that some vehicles use. Instead of having a single wire for each different circuit, PWM will use the same wire for two or more circuits by using varying pulses for different functions. PWM is a fairly recent technology, your RX300 uses a more traditional wiring system.
The # 119250KIT converter you mentioned would work well for you, it includes the wiring kit that includes the wire to connect to the battery, as... view full answer...
I spoke with my contact at Hollywood Racks regarding the Replacement 2 Inch Shank Assembly # HRRTD2 referenced in your question. He confirmed that you will be able to use this on your existing Hollywood Road Runner Bike Rack for 1-1/2 inch receivers in order to allow it to be compatible with 2 inch trailer hitch receivers.
The anti-rattle bolt, anti-rattle lever and thumbscrew are also included in this assembly. view full answer...
Yes, the Thule Roof Mounted Cargo Bag - 13 cubic feet, item # TH868, will fit on your factory roof rack. If you have factory cross bars, that run side to side, then the bag will be very secure on the roof. If you do not have factory cross bars you will need to be sure to strap the bag securely so that, when accelerating and stopping, the bag does not slide on the roof and cause damage or come off of the vehicle. view full answer...
There are many stereo units like the Jensen # JRV9000R that will allow for camera inputs, but we don't have any Kenwood units to confirm for them. The camera inputs are for hardwired inputs.
The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 5" Screen # FOS05TASF is what many RV's are pre-wired to accept and the camera receiver is integrated into the monitor, so it is not compatible with other systems like the Jensen or Kenwood. It does have wireless connection... view full answer...
Go To Results